The report highlights that i’ve been building PCs for over 20 years, and though I’ve gotten pretty good at it, a big part of that is due to the tools I use.
Industry observers note that everyone knows you need a decent Phillips screwdriver and enough space to build comfortably, but over the years and many builds, I’ve acquired a collection of extras that make the whole process even smoother.
As part of the ongoing story, from improved lighting to magnetic trays for all your screws to a blob of sticky tack that’s surprisingly useful, here are my picks for the most overlooked PC building tools that should be in your kit.
In a fresh development, lED flashlight gloves.
According to the latest update, hinshark.
The report highlights that black PC cases with lots of nooks and crannies make it hard to see what you’re doing—even with good overhead lighting. Angle lamps are great, but I’m a big fan of hands-free lighting that can peer into any bit of darkness as needed, ideally without stopping what I’m doing. If you’ve built even a single PC, you’ll know that lighting is a real problem.
According to the latest update, yes, you do need to point your fingers exactly where you want the light to go, but that’s fine since you’re already deep in the case while working on it. It lets you aim the light at all those weird angles that could normally stump you, and it’s excellent for locating screws that fall behind the motherboard tray or PSU shroud. Some people use headlamps, but I find these LED flashlight gloves work a lot better.
The report highlights that get the Hinshark LED Flashlight Gloves at Amazon.
The report highlights that needle-nose pliers.
As part of the ongoing story, workpro.
As part of the ongoing story, what do you do when you’ve lost screws deep within a case? One option is to lift the whole thing up and shake it upside-down like it owes you money. My preference is to use needle-nose pliers —or in a “pinch,” a hemostat—for reaching into those places where your fingers simply can’t. My hands aren’t the biggest, but even my fingers can’t get into some of the tinier confines of modern desktop PCs and laptops.
According to the latest update, get the Workpro Needle-Nose Pliers at Amazon.
As part of the ongoing story, extra-long magnetic screwdriver.
According to the latest update, kyuionty.
Industry observers note that a standard screwdriver is fine most of the time, but this is a great supplementary option that can really save your bacon in certain cases. The long neck makes it easier to screw stuff in without having to reach all the way into the case, and the magnetic tip makes screw recovery from hard-to-reach cracks easier. You already have a screwdriver, but do you have a long-neck model with magnetic tip ?
The report highlights that get this extra-long magnetic screwdriver at Amazon.
The report highlights that screw assortment kit.
According to the latest update, kernmax.
According to the latest update, it’s less than $10 for 500+ screws, and you get everything from motherboard standoffs to silicon washers to various screw types for motherboards, SSDs, and everything else. A screw kit is something you can compile yourself over time—just put aside all the spare screws you have after every build—but if you’re just starting out, or if you’re running low on spares, then a PC screw assortment kit is a great investment.
In a fresh development, (No more shiny silver screws breaking up your sleek, dark interior.). They’re great for blacking out a stealth build too.
In a fresh development, get this PC screw assortment kit at Amazon.
In a fresh development, magnetic parts tray.
As part of the ongoing story, tooleague.
According to the latest update, could you throw them all into a bowl and sort them out later? Sure. Or you could use magnetic parts trays to keep them separated and organized. And since they’re magnetic, you won’t lose any. When you’re taking apart or building a PC, sometimes you’ll end up working with several different types of screws and bits—and lots of them at the same time.
The report highlights that get the Tooleague Magnetic Parts Tray Set at Amazon.
As part of the ongoing story, plastic pry tools.
Industry observers note that kaisi.
In a fresh development, but when I’m reaching into hard-to-reach places that I can’t risk scratching—like when pressing PCIe slot locks or popping out motherboard cell batteries hidden under graphics cards—I much prefer plastic pry tools . Just make sure whatever you get is thin enough to actually fit into those hard-to-reach places and long enough that large heatsinks and enthusiasts won’t block its effective use. Pry tools come in all shapes and sizes, and they’re most commonly used for smartphone repairs.
The report highlights that get the Kaisi Pry Tool Repair Kit at Amazon.
As part of the ongoing story, anti-static mat.
According to the latest update, spurtar.
As part of the ongoing story, i don’t bother with anti-static wristbands, but I do always use an anti-static mat . Made from silicon (or similarly non-conductive material), they’re great for preventing shorts, especially when taking apart coolers or removing component shrouds and heat spreaders. Anti-static protection may seem like overkill, but it’s better to be safe than sorry when you have hundreds or even thousands of dollars on the line.
Industry observers note that if you have a gorgeous wooden desk, one of these mats can go a long way to preventing dings and scratches that are hard to buff out. They also help to protect whatever surface you’re working on.
The report highlights that get the Spurtar Silicone Mat at Amazon.
In a fresh development, cordless air duster/vacuum.
As part of the ongoing story, yomile.
In a fresh development, they carry a risk of damaging components due to their high pressure, not to mention the unsavory propellants that can condense on your devices. I much prefer a cordless air duster and vacuum , which can be used repeatedly thanks to USB charging. No more buying cans of air, no more propellants, and no more damage concerns. Cans of compressed air are common in PC building kits, but I don’t like them.
According to the latest update, get this cordless air duster/vacuum at Amazon.
According to the latest update, sticky putty.
According to the latest update, feosky.
The report highlights that you can recover almost anything you’ve lost in a PC if you press it hard enough into some putty. No, it’s not the most elegant solution, but if you really can’t get that screw, cable, or coin battery out of that hard-to-reach place, it’s a good last resort. It’s also useful for bracing any components that are causing weird vibrations and noises. If the needle-nose pliers fail, stick some putty on the end and try again!
As part of the ongoing story, get sticky putty at Amazon.
According to the latest update, alcohol and microfiber cloth.
As part of the ongoing story, koala.
As part of the ongoing story, and while you could always use it with paper towels or cotton swabs, I wouldn’t. Paper towels risk scratching the PCB and chips, while cotton swabs leave cotton debris behind. Use it with a microfiber cloth —the kind that’s safe for glasses and lenses. If you like a clean PCB without old, dried-on thermal paste, you should keep isopropyl alcohol on hand.
As part of the ongoing story, get the Koala Lens Cleaning Cloth at Amazon.
According to the latest update, cable ties and flush cutter.
The report highlights that klein Tools, Have Me TD.
As part of the ongoing story, a pack of these will help tidy up all those stray cables left at the end of a build. And if you want to really treat yourself, grab a pair of flush wire cutters . They’re better than standard scissors, which can leave them with sharp edges that’ll slice your fingers. There are all sorts of fancy cable tidies you can use to manage the mess of spaghetti cables, but nothing beats the convenience and cost of standard plastic cable ties .
According to the latest update, get this 400-piece cable tie kit at Amazon.
The report highlights that get the Klein Tools Flush Cutter at Amazon.
In a fresh development, double-sided and color-coded tape.
In a fresh development, romeda, Hoaoh.
The report highlights that the color-coded tape is only needed if you want the tape to blend in with the interior color of your case. Regardless, anything you can’t affix using screws can be kept in place using tape. Keep some on hand and you’ll never find yourself unable to complete a physical repair. I use tape to keep stray cables and RGB strips in place, and both double-sided tape and color-coded tape come in handy for that.
As part of the ongoing story, get this thermal adhesive tape at Amazon.
Industry observers note that get this color-coded electrical tape set at Amazon.